Default welcome msg!

Curved10x12 & 6x6 Level3 Powdercoated Mil-Spec Certified Armor Plate

Be the first to review this product

Availability: In stock

$279.99

Quick Overview

10x12 & 6x6 Level3 Powdercoated Mil-Spec Certified Armor Plate

1/4" Certified Level III Mil-Spec MIL-A46100 Armor Plate

One 10x12 plate will have a Left Hand Comfort Cut and one 10x12 plate will have a Right Hand Comfort Cut. This way, you can set your plate carrier up for either RH or LH use by either putting the RH plate in front, and the LH plate in the back (which will put the Comfort Cut of the back plate on the RH side!) or the LH plate in front and the RH plate in back, putting both Comfort Cuts on the LH side.

All 4 plates have had all edges and corners rounded so they don't cut away at your plate carrier, and all 4 plates have been Powdercoated to prevent rust and corrosion.

This is NOT AR500 or HY-100. Look up AR500 and HY100 and you will find that the "AR" in AR500 stands for ABRASION RESISTANT!! AR500 was developed to be used in high abrasion applications like back-hoe buckets, snow plow blades and farm equipment (plow and disc blades). HY100 was designed by the Navy to build ship hulls out of.

A46100 was specifically designed from the start by THE DEPARTMENT OF DEFENSE to be used as Ballistic Armor Plate! This is the best of the best armor plate that you can buy. Each and every sheet of material is Brinell tested at 2 corners to assure quality and hardness

More Views

Additional Information

1 No
10x12 & 6x6 Level3 Powdercoated Mil-Spec Certified Armor Plate 1/4" Certified Level III Mil-Spec MIL-A46100 Armor Plate One 10x12 plate will have a Left Hand Comfort Cut and one 10x12 plate will have a Right Hand Comfort Cut. This way, you can set your plate carrier up for either RH or LH use by either putting the RH plate in front, and the LH plate in the back (which will put the Comfort Cut of the back plate on the RH side!) or the LH plate in front and the RH plate in back, putting both Comfort Cuts on the LH side. All 4 plates have had all edges and corners rounded so they don't cut away at your plate carrier, and all 4 plates have been Powdercoated to prevent rust and corrosion. This is NOT AR500 or HY-100. Look up AR500 and HY100 and you will find that the "AR" in AR500 stands for ABRASION RESISTANT!! AR500 was developed to be used in high abrasion applications like back-hoe buckets, snow plow blades and farm equipment (plow and disc blades). HY100 was designed by the Navy to build ship hulls out of. A46100 was specifically designed from the start by THE DEPARTMENT OF DEFENSE to be used as Ballistic Armor Plate! This is the best of the best armor plate that you can buy. Each and every sheet of material is Brinell tested at 2 corners to assure quality and hardness

Write Your Own Review

You're reviewing: Curved10x12 & 6x6 Level3 Powdercoated Mil-Spec Certified Armor Plate